grinding dust remover manufacturer Sometimes dust leakage occurs, the reason for this is mostly related to the equipment seal, filter wind speed and dust bag. The structural parts of the bag dust collector are not integrated by assembly, so the connection of the main components are required to be sealed, such as the upper box and the ash bucket are connected by screws, if the seal used here is not matched or not up to standard, it will lead to dust leakage. The wind speed of the bag dust collector is divided into normal temperature wind speed and high temperature wind speed, the normal temperature wind speed should be controlled between 1.0 and 2.0, and the high temperature wind speed should be controlled between 0.8 and 1.0, if the wind speed is too high, the dust will be attached to the surface of the filter bag, resulting in excessive resistance and dust leakage.

grinding dust remover manufacturer cleaning and filter bag fixing method

Under normal circumstances, the round bag vibrates at the top, so that the bag vibrates vertically or horizontally, and the motor driven by the eccentric wheel is used to drive the connecting rod, so that the filter bag vibrates, and the dust on the surface of the dust filter bag is cleaned.

Second, the control of the cleaning mechanism is divided into two categories: self-made and manual control; Automatic control is the continuous work of the fan and can be carried out according to requirements. Manual control is the shutdown of the fan, which automatically stops after tens of seconds and automatically stops.

Third, the vibration dust removal at the top is hundreds of times per minute, so the dust falls into the ash hopper. The mechanical vibration cleaning device is simple to operate, but the dust removal effect is poor, and the dust amount should not be too large.

4, according to the specified time or resistance value, according to the automatic control program for pulse jet cleaning. The filter bag is usually used for external speeds and it contains a skeleton for support. Dust is collected and deposited on the outer surface of the bag.

The porous plate fixing the filter bag is located in the upper part of the dust collection box, and there is a soot blowing pipe above each filter bag. The nozzle opens in the center of each filter bag. The other end of the spray pipe is connected with the pulse control system and the compressed air tank, which is composed of a pulse valve and a control valve.

When the jet air passes through the top of the filter bag, it can induce the air of multiple jet air, blow into the inside of the filter bag to form an air wave, so that the production of the filter bag rapidly expands and shocks the vibration, and produces a dust removal effect.

Seven, the pulse period can be adjusted, usually 1 minute to a few minutes. Depending on the direction of the pulse jet and the purification air flow, there are three methods: direct injection, reverse injection and reverse injection.

Eight, grinding dust remover manufacturer cleaning methods are mainly mechanical cleaning, pulse blowing and mechanical reverse blowing. Single-machine bag filters use a mechanical vibration device or hang the frame of the filter bag to make the bag vibrate and dust.

grinding dust remover manufacturer The grinding dust remover manufacturer is a device that controls the dust-containing air flow and collects dust. It is an important part of the dust collection system of the cloth bag dust collector. In the use of the filter bag, the dust area gradually increases and the pressure difference rises, and the dust should be cleaned and isolated to keep the pressure difference inside and outside the filter bag within the set range. When the grinding dust remover manufacturer is running, it should prevent sudden abnormal situations, such as sudden rise in gas temperature, or corrosive gas entering, or sudden drop in gas temperature below the dew point, etc. By temperature, humidity, chemical corrosion, mechanical wear or impact and other factors beyond the filter bag is not afraid of force damage.

grinding dust remover manufacturer https://www.kaisenfilter.com/KSZHDM-01-Combined-Grinding-Dust-Collector.html