The state of cap embroidery machine collapse is that the needle bar is pierced in place when the computer embroidery machine is working, and the pull bar stops, the buttons fail, or the machine stops in a certain state and cannot perform any operations. The main reasons for the crash are as follows:

1. interference

Interference source from the neutral line: The interference of the system power supply mainly comes from the neutral line. If the user cannot provide a standard and reliable neutral line, the interference from the neutral line will occur immediately. In the design of the electronic control power supply, the three-phase 380V power supply system has avoided the possible interference caused by the neutral line, but in the case of using 220V power supply, because the neutral line must be used. Therefore, the customer must be required to provide a standard and reasonable neutral wire.

Other interference: The computerized embroidery machine is a complex system that combines electronic control and machinery with multiple execution components. In order to avoid mutual interference between components and ensure the stable, reliable and safe operation of the system, we have adopted complete shielding measures to achieve effective shielding, The customer must be required to provide a standard ground wire. If there is no reliable ground connection, the system may crash.

2. Signal cables and connectors are loose

After the machine has been transported for a long-distance or operated for a long time, it may cause loose cables or unreliable contact of the connectors. In this way, it may cause a crash during system communication. Although this situation is extremely rare, it should be used during machine maintenance and repair. Pay attention to the inspection of the connector.

3. The number of stitches stored in the memory exceeds the allowable value

When too many patterns are entered and the memory capacity is insufficient, the system may crash. At this time, please check the number of needles in the memory, save the temporarily unused patterns to a floppy disk, clear the unused patterns, and ensure the running space of the memory to eliminate the crash.

For more information about the sequins embroidery machines, please continue to pay attention to Zhuji Zhiyu Machinery Co., Ltd. If you have any questions, you can also contact us.