The manufacturing process of hydraulic fittings is complicated. In addition to the high requirements for mechanical processing, cleaning is also a problem that domestic manufacturers require to break. Taking the key components of hydraulic components such as hydraulic pumps and hydraulic valves as examples, the cleaning is more complicated. There are different cleaning requirements before and after different procedures, and there are corresponding cleaning equipment applications. Next, Hose Fittings And Adapters Supplier introduces how to clean hydraulic fittings?

The production process of hydraulic pump and hydraulic valve hydraulic parts is generally: processing-intermediate cleaning-thermal deburring-rust cleaning-honing-cleaning-assembly. The hydraulic pump valve has a complex structure, with deep holes, punching holes and many curved holes. It needs to have mechanical movement of parts and regular filtration of cleaning fluid. Strong separation force, strong ultrasonic function, clean clean.

The role of intermediate cleaning is to remove a large amount of cutting chips and emulsion after processing, and to complete complete drying at the same time, so as to facilitate the next thermal deburring process. However, due to the complicated cavities and pipelines of hydraulic valves and hydraulic pumps, it is difficult for general cleaning equipment to flush out impurities in the cavity and pipelines.

For the cleaning of such hydraulic fittings with complicated cavities and pipelines, it is necessary to generate turbulent water flow that circulates from time to time to discharge impurities. Some cleaning machines can be used, and the large flow jet is separated by the rotation of the hanging basket to form vortex and turbulence, which can achieve a good cleaning effect.

Through the above introduction, Wholesale Hose Fittings Manufacturers hopes that you can simply refer to the content of this article in future use.