Dimout Fabric Manufacturers introduce how to install curtains correctly?

1. position
The accuracy of the line drawing and positioning is related to the success or failure of the curtain installation. First, measure the fixed hole distance and the size of the required installation track.

2. Install Curtain Rails
(1) Curtain rails are divided into single, double or triple rails. When the window width is greater than 1200mm, the curtain rail should be disconnected, the simmering bend at the disconnection should be staggered, the simmering bend should be a gentle curve, and the lap length should not be less than 200mm. Ming curtain box generally install the track first. Heavy curtain rails should be added with machine screws; dark curtain boxes should be installed at the rear. The small corners of the heavy curtain track should be densely spaced, and the size of the wood screws should not be less than 30mm.
(2) Install the hoisting clip, rotate the clip 90 degrees to connect with the track, and install the hoisting clip on the top plate with self-tapping screws. If it is a concrete structure, an expansion screw needs to be added;

3. Install Curtain Rods
(1) Correct the connection fixture, install the rod or wire, and pull it on the fixture. Make it flat and consistent with the elevation of the room.
(2) When installing standard curtain track (double track), its basic width should generally be more than 15CM, and the single track can be reduced according to appropriate conditions.

4. Adjust the position
For floor-to-ceiling curtains or curtains that hang over the countertop, the width of the window sill should be allowed when installing the track, so as to avoid the curtains being blocked and unsightly from sagging.

Through the above introduction, Blackout Curtain Fabric Manufacturers hopes that you can simply refer to the content of this article in future use.